Cleaning an aquarium step by step - tips and tricks for all occasions

Aquarium fish need clean water. It's a matter of survival. Waste products are released into the surrounding fluid. This makes it toxic. The fish breathe it again and receive a dose of toxic substances - ammonia, nitrates, nitrites. Over time, the concentration increases. The inhabitants of the aquarium get sick and die. The water looks clean. Therefore, it is necessary to regularly clean the aquarium and change its water.

Another reason is overgrowth. It is also associated with waste products, rotting food debris, and microorganisms. The glass becomes covered with dirt and algae. The water becomes cloudy. The filter becomes clogged and stops working. The life of the fish becomes unbearable.

How to clean an aquarium?

To do this you will need a certain set of tools. Detergents are used every few cleanings. In addition, you need clean, fresh water and a container where you can place the aquarium inhabitants and plants.

Aquarium cleaning tools

1. First of all, you will need a net. They catch flora and fauna.
   

   Interesting fact: a small net is easier to manipulate in the water, a larger one is easier to catch fish. The choice of net depends on personal convenience.

2. To clean the walls you need a special scraper. Different materials require different scrapers; there are separate types for cleaning corners and stubborn dirt. You need a set of several scrapers or a universal tool with interchangeable attachments. This will allow you to achieve better cleanliness and ensure the prevention of various diseases.
3. To clean the soil from waste, a siphon is needed. This is a specially designed container with a hose. The soil is scooped up with a siphon, water and waste flow down the hose, and heavier materials remain in place.
4. A bucket, preferably several, is used in different ways. Dirty water is poured into it and clean water is poured out of it. You can put fish in it while cleaning. The bucket into which the aquarium is drained should be used only for this purpose, so that toxic substances do not get anywhere else.

Detergents

There is often advice to use bleach or “whiteness”.

Attention! It is prohibited to wash the aquarium itself with them! Getting even a small amount of such products into the water will kill all the fish. Bleach is used in exceptional cases and only for cleaning decorations.

A less dangerous analogue is hydrogen peroxide. The ideal solution is plain water. Only it definitely won’t harm the inhabitants. For particularly difficult stains, boiling water is used.

Baking soda, potassium permanganate, and washing powder solution are used to disinfect the tank.

It is acceptable to use chemical cleaners on the outer walls of the aquarium. The procedure should be performed carefully and carefully. Special napkins for glass and napkins for monitors are also suitable.

Necessary equipment

To properly clean an aquarium, you will need special tools. They can be purchased at a pet store. It is better not to use improvised materials: small particles of the sponges we are used to can be deadly for fish.

To clean your aquarium you will need the following:

• The scraper is a dense sponge attached to the handle using a metal frame. It is convenient for cleaning glass from plaque.
• A siphon allows you to remove debris from the ground.
• A net for catching and transplanting fish into another container. Prepare a large jar of settled water for them.
• A toothbrush is useful for cleaning filter parts or small decorative elements.
• Paper or regular towels will help quickly dry up excess moisture.
• An aquarium pump is a device that allows you to quickly pump out a large volume of water from an artificial reservoir.

Advice! Instead of a siphon or pump, you can use a piece of ordinary hose of small diameter.

What detergents can I use?

The aquarium should be cleaned only with special products. Ordinary household chemicals are, for the most part, harmless to humans, but destructive to the underwater world. To avoid disaster, purchase an aquarium cleaner from a pet store. If unforeseen circumstances occur and you have to use a soap solution, rinse the vessel with running water several times. But it is better to avoid such situations and not abuse chemicals.

Beginning aquarists are wondering whether it is permissible to clean the vessel with improvised means - salt or soda?

Some people use traditional methods quite successfully.

1. Transfer the fish using a net into another vessel with settled water. Cover the container with a towel to prevent the fish from jumping out, frightened by the excessively bright light.
2. Pour out the dirty liquid and rinse the walls with hot water, sprinkle the glass generously with soda and leave for 15 minutes. Sea salt works in a similar way.
3. Rinse the fish house thoroughly under the tap to remove all the alkali.
4. Rinse the aquarium with settled water prepared for filling.
5. While the walls of the tank are wet, blot them with a paper towel and polish them.

How to properly clean an aquarium in a planned step-by-step manner

A routine cleaning of an aquarium involves several parts: cleaning the bottom, walls, decorations, filter (if necessary) and adding water. The aquarist’s movements should be smooth so as not to frighten the inhabitants.

Note! During scheduled cleaning, fish are not removed. This will cause more stress than cleaning. In addition, a sharp change in the composition of the water has a very bad effect on the health of fish.

The soil and bottom of the aquarium are cleaned last. As a result of previous actions, dirt and algae settle right there. Washing the soil removes debris and completes maintenance.

How to clean the walls of an aquarium

The walls are cleaned with special scrapers or a sponge without the use of cleaning agents. Particular attention must be paid to the corners. The type of tool depends on the material of the aquarium: glass is difficult to scratch, but for acrylic you will have to use the softest surface.

To begin with, the aquarist cleans the walls of the container from plaque. Next comes the turn of seams, corners and the ground area. If there is a lid, it is convenient to remove it and rinse the whole thing under running water.

It is usually enough to rinse the outer walls with warm water and wipe dry. A sponge will help with heavy dirt. Wipes for glass or monitors are safe and will eliminate streaks. You can use liquid to clean glass. If the aquarium does not have a lid, glass cleaners must be used carefully. The product is applied to half the walls, then distributed manually. Wipe the container with paper, newspaper without pictures, soft cloth, microfiber cloths.

Scenery

Stone and artificial plants are cleaned with running water and a sponge. For more severe stains, boiling water is used. Hydrogen peroxide and bleach are used only in extreme cases. Bleach must be diluted with water in a ratio of 1:9.

Important! After using cleaning products, rinse items thoroughly before placing them in the aquarium. Even a small amount of bleach will cause the death of all fish. Unwashed peroxide will disintegrate in water, but it will still not be beneficial for your pets.

Poor quality decorations can be damaged by bleach. Also, they cannot be used to process objects made of silk.

Only water is used to clean natural scenery. Some experts recommend not washing them at all. It’s really better not to even move snags and branches. The algae growing on them is often decorative and serves as food for some fish. Corals should not be moved either. But the stones need careful processing. If there is a lot of debris on the corals and branches, the problem is usually due to improper organization of the aquarium. Lack of space, too many fish, too much feeding - these are the things that need to be corrected first. If the tank becomes overgrown with algae too quickly, you need to fight the cause, not the effect.

Plant treatment

Many aquarium plants are easy to care for. They need to be cut and weeded. Trimming must be done regularly as algae grows quickly. Plants with long stems are most decorative from above, and timely pruning will preserve their appearance. Weeding is done carefully, without approaching the stem directly.

Some plants reproduce by layering. They will quickly fill the entire aquarium. If this scenario is undesirable, the cuttings should be removed at each scheduled cleaning.

Yellowed, fallen, rotting parts of algae must be removed. For these purposes it is convenient to use a narrow net.

Equipment

Timely cleaning of the filter is important for the well-being of the fish. The water pressure signals the need to do this. If it has become weaker, the device must be processed. It is clogged with food debris, algae and limescale.

The internal filter is the easiest to clean. You just need to rinse it under running water. Some people recommend using aquarium water for this so that the bacteria living on the filter do not die. However, these bacteria normally live in the soil. If the filter is washed with plain water, microorganisms will very quickly repopulate it. You will also need to clean the body of the device from algae and plaque.

You will have to clean the motor itself and its impeller somewhat less often. They are wiped with a clean dry cloth.

Be careful! Before disassembling the filter, disconnect it from the power supply.

Low-power filters in small aquariums must be treated with every scheduled cleaning. Stronger ones - every other time. Experts do not achieve perfect cleanliness when washing the filter. It will only harm the fish.

Some filter parts need to be replaced from time to time. There are disposable membranes that will have to be changed every week. Special sponges built into the device are replaced less frequently. If they are falling apart, it's time to buy new ones. The lifespan of the filter itself is also limited. At a certain point it stops being cleansed. You cannot treat it with detergents; you need to buy a new one.

The external filter is washed much less frequently. This is a more complex process. After disconnecting the device from the network, you must turn off the taps of the hoses, then separate the latter from the device. Next, the hoses, trays with filter filler, and the inside of the housing must be washed. This is convenient to do in the bath or shower. A narrow brush is suitable for hoses.

Afterwards the pallets must be placed back. Now comes the turn of the filter impeller. The housing is filled with water and the device is assembled. Hoses are connected. The aquarist then turns on the water supply and the electric current.

Important! When cleaning filters, do not use detergents! The smallest amount of cleaner will be distributed throughout the entire aquarium by the water flow. If the contamination is complex, hot water will help.

If the aquarium has a compressor, it also needs to be cleaned. Most often the hose becomes clogged. It can be cleaned or replaced. If the air filter is dirty, you will have to disassemble the device. You can wipe it from dust with a clean dry cloth.

The internal heating element is cleaned of algae. Usually you have to leave it on.

How to wash the soil in an aquarium

There is an opinion that aquarium soil must be cleaned by rinsing it with running water. Some beginners even heat it with boiling water. You can't do that. This will kill all beneficial microorganisms, disrupt the nitrogen balance in the aquarium and can lead to fish disease. Using a siphon is the correct way to clean.

Washing the soil too frequently should be avoided. This also has a negative effect on the fish. Cleaning once every two times will be sufficient.

How to clean the bottom of an aquarium

If there is no soil in the aquarium, the bottom is cleaned with a scraper. After which the waste layer is removed with a siphon.

Cleaning and adding water to the aquarium

Water change volumes are from 10% to 50% at a time. The frequency of water changes also varies. The water cannot be completely drained. Tap water won't work either. It contains too much chlorine. To purify water, it must be left for a day. Or you need to use special products such as air conditioners. Vitamins and mineral supplements will tailor the water exactly to the desired fish. Aquarium salt is used to obtain sea water.

Attention! If the water is cloudy, changing it completely can only make it worse.

If the liquid has deteriorated after adding fish or changing the water, it is usually enough to wait a few days. The sediment will settle to the bottom. If fresh water has not been added, the following options are possible:

1. The filter has deteriorated or become dirty. It needs to be replaced or cleaned.
2. Burrowing fish can lift a lot of soil from the bottom. They need a more powerful filter.
3. The aquarium is overcrowded. You will have to put some of the fish in another container.
4. Insufficient quality or too infrequent cleaning of the aquarium.
5. Driftwood and branches release tannins when placed in water. They color the liquid and are liked by many fish. After some time, the tank will be clean again.
6. Poor quality decorations are used. Poor quality varnish or paint can leach into the water, changing its color and poisoning the inhabitants. Such items must be removed immediately.

Pollution prevention

To reduce the rate of pollution of a reservoir, its overpopulation should be avoided. You should not overfeed your fish. Uneaten food, when decomposed, releases substances that are poisonous to fish into the water and provokes the growth of algae. Coarse gravel should not be used as soil. Food that falls between the pebbles becomes inaccessible to fish and begins to rot. Planting plants helps to utilize excess organic matter from the soil.

To prevent the growth of algae, you can place freshwater shrimp in the aquarium, which will use them as food. Certain types of fish also cope well with eating algae (for example, the Siamese algae eater). Some types of fish (for example, chain catfish), as well as mollusks, are able to clean the walls and decorations of plaque. You can clean the water in an aquarium from unicellular algae using special algaecide products sold in pet stores.

It is important to use a filter. It not only purifies water from mechanical contaminants, but, along with the soil, is also a habitat for colonies of nitrifying bacteria that convert toxic substances into safe compounds.

How to deep clean an aquarium with restart

Every aquarium needs a restart from time to time. It should not be carried out for prevention. Restarting an aquarium differs from the first start in that it is necessary to first sanitize the container and its contents.

Fish jigging

If the quality of the old aquarium water is sufficient, it is poured into a new container. The fish are transplanted there. Or use water that has been standing for at least two hours.

Important! You need to carefully monitor the behavior of the fish. Stress and changing conditions can cause illness or death.

Removing and washing plants and equipment

Living plants are washed with warm water and placed in a separate container. Filters and compressors are removed and thoroughly washed.

How to clean soil and decorations in an aquarium

To clean decorations in extreme conditions, it is acceptable to use bleach. Things must then be washed thoroughly. It is advisable to use boiling water. The soil is either replaced or processed. Processing consists of thoroughly washing the soil and calcining it in the oven.

Preparing and filling water

Water is prepared in the same way as during scheduled topping up. It is necessary to remember the concentration of various substances and compliance with PH, hardness and salinity.

Putting everything back in place

Starting the aquarium is carried out in the following order:

1. Soil is laid out at the bottom.
2. Suitable water is poured into the aquarium. The liquid level exceeds the ground level by about 10 cm.
3. Plants and decor are placed.
4. Equipment is being installed.
5. Residents are starting.
6. The water level is brought to the usual level in several steps.
7. The equipment turns on.

The behavior of the fish must be carefully monitored at first.

Preparing replacement water

No more than 30% of its volume can be drained from the tank at a time. Replacing more water is only possible when restarting the aquarium due to illness of its inhabitants or severe disturbances in environmental parameters.

Instead of drained dirty water, clean water is poured. Before this, it must stand for at least a day. Unsettled tap water cannot be used, because... it contains chlorine and other substances toxic to fish. Settling allows you to get rid of most of the impurities.

Special cases of cleaning an aquarium

How to clean a large aquarium at home

Magnetic scrapers are available for cleaning deep aquariums. One part of the device is placed in the water, the other on the other side of the glass controls its movements. This allows you to clean hard-to-reach places. Your hands won't get wet. There is no point in pulling large decorations out of the water. It is enough to wipe with a sponge before treating the soil. Small ones can be reached with a manipulator. A hose is used to add water.

How to clean a small aquarium

The only difficulty here is soil treatment. For a small aquarium with a volume of 10-20 liters, the siphon is too large. It will drain half the water or more. You need to cut it in half and insert a small tap inside. You can buy one in the garden products section. You can also use any narrow tube. There are compact, low-power siphons on sale specifically for small aquariums.

How to clean an aquarium with fry

This aquarium lacks decorations and soil. However, a lot of dirt accumulates. The reservoir becomes covered with dirt and mucus. It is removed with a sponge. You need to take a small siphon.

Note! A siphon with a tube of standard width can suck in the fry. You can catch it with a net. It is preferable to use a tube for small aquariums.

How to properly clean an aquarium that hasn't been cleaned for a long time

If there are no fish in the aquarium, the tank is subjected to standard processing and restarting. If there are fish, they have adapted to live in dirty, toxic water. A sudden change of fluid to a more suitable one will kill them. The replacement is carried out gradually, no more than 10-15% at a time. When cleaning, it is important to stop in time. Fish that are not used to it will panic and may harm themselves. You shouldn't do everything at once. The most important thing is to clean the filters and soil.

How to clean an aquarium in emergency situations

In extreme situations, such as illness or death of fish, deep processing is required. Cleaning agents and boiling water are used. The soil and decorations should be changed, the equipment should be thoroughly cleaned. Living plants are planted in a separate container for a month or three. They are undergoing quarantine.

The aquarium itself needs to be filled with potassium permanganate or a solution of bleach or washing powder. Keep it like this for a day and rinse thoroughly.

We process plants

Artificial water tanks designed to house fish almost always contain a large amount of vegetation. Plant waste products are one of the causes of aquarium clogging. Rotten leaves settle to the bottom and accumulate if they are not removed for a long time. This promotes the proliferation of pathogenic microorganisms.

Note! It is not recommended to transplant plants to another place if they have been located in another area of ​​the aquarium for a long time. You should also remember that spoiled leaves must be removed immediately.

Some plants can grow significantly over time. It is recommended to remove them, as they make it difficult for fish to move freely inside the glass tank.

Interesting: How to build a gazebo at your dacha with your own hands

Tips for care and use.

How to prevent contamination so as not to wash the aquarium frequently

Maintenance must be carried out regularly. Cleaning too often and too hard will harm the fish, and too infrequently too. Cleaning products should only be used as a last resort. There should not be too many animals in the tank. There is no need to overfeed them. Equipment must be maintained in good condition. Part of the water is changed regularly. The soil should be siphoned, not washed. The main condition is attentive, but not excessive care.

How to clean the soil in an aquarium with a siphon

The end of the siphon hose must be directed into an empty bucket. Use the neck to scoop up the top layer of soil. The waste, along with some of the water, will fall into the bucket. You can't do this too carefully. It is enough to walk along the bottom once and remove what can be easily removed.

Attention! Some caution is required during the procedure. It can pull fish inside. This will not harm the small fish. It will go into a bucket where it will be easy to get out. But a large one, resisting the movement of water, can damage the fins. You should not point the siphon directly at the inhabitants of the aquarium.

If there are live plants in the tank, only the exposed areas need to be cleaned. If there are decorations and shelters, it is imperative to clean underneath them. This is where the most waste accumulates.

How to recognize aquarium pests and get rid of them

Any shellfish pose a threat to the aquarium, as they quickly pollute it. This is especially true for snails. They feed on fish food and actively reproduce. They can be removed by hand or using snail traps. These are sold in specialized stores.

Three types of algae pose a danger to an aquarium: brown, green and blue-green. To get rid of the first two, you need to adjust the tank lighting. Brown algae appears in dark water and looks like a brown coating. Greens multiply when there is too much light and make the water green and cloudy. If there are too many of them, residents can suffocate.

Attention! Algae reproduce only with sufficient food. Do not overfeed fish or keep many in one container. Timely cleaning is required.

Blue-green algae cover objects with a film. They are toxic to fish and steal light from plants. It's hard to get rid of them. The films are removed by hand or with a sponge, and the water is often replaced. Only restarting the aquarium is guaranteed to help.

If other algae appear in the aquarium, you can remove them physically.

Biological methods for cleaning an aquarium

Tetradons, loaches and Helena snails feed on other snails and clean the aquarium of them. Loricaria catfish eat rotting wood. Algae eaters and Amano shrimp will help get rid of algae.

We must remember that they are all living beings, just like other pets. They need to be looked after and their behavior monitored.

Cleaning an aquarium is a process that often intimidates beginners. There are many operations to be carried out and many parameters to be taken care of. Cleaning is slow at first, but over time it will take 30-40 minutes per week. A happy, healthy fish will please you much longer.

How often do you clean the aquarium, what equipment do you use? Write to us in the comments!

Helper fish

For additional help in daily cleaning of the aquarium, you can get nurse fish. There are species of fish that feed on unicellular algae, thereby saving the artificial reservoir from unnecessary sedimentation of plaque. However, these pets are only helpers and begin to eat algae only when they feel hungry.

Ancistrus helper fish

In addition to fish, other animals in an artificial reservoir can also perform cleaning functions. Helpers in cleaning an aquarium:

• Gold fish.
• Corridor.
• Viviparous inhabitants.
• Ancistrus (sucker fish).
• Brocade catfish.
• Labeo.
• Gourami.
• Catfish otocinclus.
• Gyrinocheilus.
• Siamese algae eater.
• Snail.
• Shrimps.

Vegetation treatment

If there is living vegetation in an artificial reservoir, then it also requires care and purification. Plants can be cleaned at home, following certain rules:

• Plants do not like transplants.
• Vegetation is not processed during every harvesting operation.
• Spoiled and damaged leaves are cut off.
• Overgrown plants must be removed so that they do not become an obstacle to the free movement of fish.
• Pruning should be done as the bushes grow.
• Overgrown bushes should be thinned out so that they do not interfere with the penetration of light into the container.
• If it is necessary to remove a plant by its roots, the manipulation is carried out as carefully as possible to prevent the rise of turbidity from the substrate.

We clean it mechanically

To clean limescale and algae, you can use the following available tools:

1. Kitchen sponge. This well-known dishwashing accessory effectively removes aquarium stains; all you need to do is walk the hard side on the inside of the glass and then the soft side to secure the result. It is impossible to damage the material from which the “fish house” is made with a sponge: when working manually, a person feels the force of pressure and pressure.
2. An old plastic card (for example, a bank or discount card). An unnecessary household item turns out to be indispensable for cleaning up sediment. The thin edge of the card is very convenient for removing stuck dirt. In addition, the plastic acts delicately and does not scratch the glass.
3. Toothbrush. The personal hygiene item copes well with dirt, penetrating into the most difficult to reach places. This type of cleaning is especially good for mini-aquariums and small decorative parts.
4. Razor blade. It scrapes off heavy deposits well.

All these tools can be used without draining the water. After completing the work, there is no need to catch dirt from the surface. It is enough to drain some of the liquid using a siphon or hose (usually no more than 25% of the water is replaced), the rest will be drawn out by the filter. It will need to be removed, cleaned of mucus and plaque, then put back and added good water to the aquarium.

Cleaning frequency

It is recommended to clean an aquarium with a volume of more than 200 liters at least twice a month. Less than once a week. The frequency of general cleaning is determined individually. The following factors influence the decision:

• well-being of fish;
• number of inhabitants: the more populated the aquarium, the more often cleaning is needed;
• indicators of tests that determine the amount of nitrates in water (Ptero, NILPA and others);
• appearance of the aquarium;
• the smell coming from it.

Cleaning is necessary if the following occurs:

• brownish-greenish coating, fouling of walls and decor with algae;
• dirt rising from the bottom;
• deterioration of the filter (poorly pumps water);
• formation of a film on the surface;
• Poor breathing in fish and their death.

Procedure for cleaning algae and decorative elements

In order to make the aquarium unique and create comfortable conditions for its inhabitants, various decorations are used - shells, large stones, ships, houses, artificial algae. These items are also covered with algae and traces of fish activity, so they require regular cleaning.

To maintain order in the tank, periodically weed out live algae and remove damaged parts of plants

Procedure for cleaning the decorations:

1. Remove items that require cleaning from the tank.
2. Rinse items with warm running water.
3. Use an old toothbrush and baking soda to remove plaque. It is important to thoroughly wash all surfaces, remove plaque and dirt.
4. Rinse the decorations with clean water and place them in the tank.

It is strictly forbidden to use any detergents to wash the decorations. Even the slightest particle of chemicals that gets into the water can lead to poisoning and death of aquarium inhabitants.